Here is a description of the function/use of each socket: There were Metal Sockets in the pin holes numbered 1, 4, 5, 7, 9 & 16 as YOUR photo shows. Late 2007 model had D-Can High & Low in Sockets #6 & #14. I presume from your photo of the OBD II Socket that your 2007 328i was built BEFORE ? Socket wiring changed as of. ĭoes Light on Outboard side of BG Cable large end light for ~ 1 second when you plug it into OBD II Socket? That doesn't mean you have connected to a Bus Line, it ONLY means there is 12V+ at Socket #16 (Battery Power). On my 2007 model BUILT AFTER that switch is in Right-hand position, BUT See Below as that is PROBABLY NOT the correct position for vehicles built BEFORE. What is Slide Switch position - Right, Middle or Left? Hold the BimmerGeeks Cable with pins pointing UP, and Slide Switch facing you. I figured it might be my cable so I bought a bimmergeeks cable to no avail. I can not get a connection to read codes in both INPA and ISTA.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |